How to Use Gamecube Controller on Project 64 – Edited

10 Steps to Use Gamecube Controller on Project 64

Best Gaming Tips and Tricks, Technology

In this article, we will show you the 10 steps to use Gamecube controller on Project64. A GameCube controller is a controller that is used to play GameCube games on a GameCube console. Gamecubes were invented in 2001 by the Japanese. In the course of this article, we won’t be looking at how to use a Gamecube controller on a Gamecube console. We would rather be looking at how to use a Gamecube controller with Project 64 on a PC. Modern Laptops, nowadays have a lot of processor capacity, this has always aided in providing quality infrastructure for a nice gaming experience.

This is How to Use Gamecube Controller on Project 64;

What is Project64?

Table of Contents

Project64  is a powerful emulator that is available for the Windows and Android platforms. In times past, new generation consoles and computers were stepping into the game consumer market. The Nintendo company, in a bid not to be left behind, built a lot of emulators that allow GameCube lovers to play their favorite games with modern devices.  Here is a loss of all Emulators for the Gamecube console and its game along with the platforms they run on.

Emulator Availability Running Platform
BizHawk Open-source Windows
Project64 Freeware Windows, Andriod
ReroArch Open-source Multiplatform
Mupen64++ Free Windows
Mupen64 Freeware Windows
1964 Freeware Windows





Windows, macOS, Linux

SupraHLE Windows Freeware
Daedalus Windows Freeware
UltraHLE 2064 Windows Freeware

Our main focus is Project64, because that’s the emulator we would use for reviewing how to use Gamecube controller on PC with.

 10 steps to follow If you want to use Gamecube controller on Project64

We are going to teach you how to use a Gamecube controller on project64. To use a Gamecube controller, you would need a lot of things. We would be looking at installing Project64 emulator on your PC, and then, making a choice off the numerous quality GameCube adapters out there in the market. We should bear in mind that we are not trying to run GameCube sensation on a console but on a PC.

In light of this, the adapter of my choice in this edition is the Pdobq adapter. I had to make this call because, from my experience, the Pdobq Adapter doesn’t require a driver or any installation to run.  It is the easiest of all adapters to use.

Finally, in a stepwise manner, let’s look at how to use project64 emulator to configure the GameCube controller that is connected to the Pc via the Pdobq adapter. Without any further ado, let’s delve in.

Related: 4 Tricks to open Fortnite REPLAY files on PC and MAC

Step 1: Install Project64 on Your PC

There are some requirements for having Project64 on your PC. Here are some of them;

  •  A CPU of at least 650MHz Intel Pentium 3 or AMD Athlo XP
  •  1GB Ram
  • Direct X 8.1 GPU (with a minimum requirement of at least ATI Radeon 8500)
  • A router with very staple internet Connection.
  • Enough disk space

Now that you have the installation requirements, let proceed with the installation. So start with downloading the Project64 installer. After that, click on the downloaded file, and then click on run to kick off the installation. Before you install, you would see an option to choose a destination folder for your installation. After that, click on next.

When the installation is done, an option to a create desktop icon would show up. Click this, then Finish. Hurray! You have installed Project 64 Emulator on your Laptop.

Step 2: Get the pdobq Adapter

This quality adapter shares a close resemblance with the official Nintendo Adapter. Compared to the official Nintendo adapter, it is smaller in size. Respite of this, it performs almost the same way the Nintendo official adapter does.  This special adapter supports four wired GameCube controllers. As stated earlier, it is very compatible with the PC, MAC, and Wii U for a wonderful gaming experience.  You can place an order for your own pdobq adapter at Amazon or Aliexpress.

Related: 5 steps to troubleshoot and fix Nintendo Switch overheating

Step 3: Plugin the Pdobq Adapter

The main job of the Pdobq adapter is to serve as an intermediate. It works like a USB docker. The Pdobq helps your gamecube controller gain access to the USB ports of your PC. Now for this step, connect the Pdopq to your PC.

 Step 4:  Connect the Gamecube Controller to the pdobq Adapter

With your Pdobq adapter now playing intermediate, connect the gamecube controller to it. There are lots of quality game controllers to make a pick from. Some of these include:

  • PowerA, Wireless GameCube Style Controller for Nintendo Switch
  • Nintendo Switch Pro Controller
  • Nintendo Joy-Con – Neon Pink / Neon Green
  • CIPON, Wired Controllers Classic Gamepad Joystick for Nintendo and Wii Console, Black
  • EVORETRO GameCube Controller Bundle 

Step 5: Open Your Project64 on your PC

At the beginning of this guide, I mentioned that Project64 is an emulator that allows you to play GameCube games on either Windows, macOS, or Linux platform.  Click on the Desktop icon of you PC and open up Project64 emulator

Step6: Select your Gamecube controller

Select your Gamecube controller on your project64 on your PC. That’s all for this super simple step.

Step 7: Configure control settings

Now, it’s time for you to set up your GameCube controller with Project64.  Go to the top of the Project64 game selection window. Then click Options > Configure Controller Plugin.  Wait for at least one minute while it loads, after its done loading, a box would show up. Click the buttons you see in the window, and then subsequently press the same buttons on your controller. After this, click ok.

Related: 10 places to rent Nintendo Switch Console and Games

440" crossorigin="anonymous">

Step 8: Close the control Settings

When you are done with all these settings, close the control settings panel.

Step 9: Add Games to the Project64 Emulator

So finally, you can now add games to your Project64 emulator on your laptop. Go to the web and download any games of your choice. Go to the Project64 emulator and select the file folder for the game, and it should appear in the games list.

 Step 10: Enjoy your games

That’s it for our guide on how to use a GameCube controller on Project64. You can now enjoy your Gamecube games.

That is How to Use Gamecube Controller on Project 64.

👉 CLICK HERE to Subscribe for Canada jobs with visa sponsorship

Spread the love
Author: Simon RobertEasyInfoBlog is a multi-author blog. We have experts and professionals in various fields who share their ideas and expert knowledge to help you with your daily information needs. Thanks for reading!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.